Healing

Advanced Healing and Repair

Once translated, many models still pose difficulties after import. Healing is an important part of a tightly integrated multiCAD interoperability solution. REALyze provides a variety of fully automated and manual healing tools to enable precise control of the repair process.

Repair

Model Rx healer closes gaps and corrects problems.
Accurate procedural surfaces.
Tightest possible tolerances.
Full wireframe, curve and surface creation and repair capabilities for hybrid models.
Cover and patch capabilities with tangency control.
Measure actual and projected distances

Diagnosis

Real-time troubleshooting of models.
Measure actual and projected distances between selected entities and positions.
Verify area, centroid and perimeter of selected closed chain of curves.
Verify radius of curvature at select locations along a spline.
Identify short, free, and non-manifold edges.
Identify gaps.
Identify tolerant geometry.
Optionally store and verify data results as user defined variables.
Automated removal of overlapping entities.
Simple viewing and reversing of entity direction.

Solid/Surface Verification

Report volume, surface area, center of gravity and moments of solids.
Create a point at the center of gravity of solids.
Display diameters and depths of standard hole types (drill, cbore, etc.).
Verify diameter/radius of circular edges.
Verify length of linear edges.
Display surface normal and U and V directions of selected face or surface.
Display curvature extremes via gradient shading of face/surface.
Measure deviations between a surface and selected curves, edges and points.
Place points, vectors (normal, tangent and cross) and flowlines at selected locations on a surface or face.
Create a plane entity tangent to a surface or face at a selected location.
Generate polygon entities from facets.
Generate silhouette curves along the outside edge of a solid/surface as projected along a selected vector.